Tag: pallet garden

Peeps!

This post has been a long time coming. So long, in fact – that we’re still total chubsters in these snaps. Goodness.

Well, you guessed it – I’m going to talk to ya about making a pallet!

Here’s what you’ll need:

1. A Reclaimed Pallet – make sure it’s HEAT TREATED (marked HT on the slats). You might be able to snag one of these for FREE by heading out to your local hardware store. Sometimes these guys and gals are pretty awesome and they recycle their pallets, so be sure to head out early on a weekend or speak with a manager in advance.

• If you can’t find a reclaimed pallet, you can always make one. Just note – it can get pricey.

What’s heat treated? It means the wood has not been treated by chemicals, resulting in the awesome ability to plant fruits and veggies within the pallet slats. If you were to use a chemically treated pallet, you might get sick. We definitely don’t want that!

Now, we were only able to find chemically treated pallets or really beat-up heat treated ones. Being the enginerds we are, the beau and I chose to build a pallet. That’s right, we got down and dirty with a sexy power drill and made sure not to split our wood with extra-long screws. More on that later…

We chose to purchase standard 2X4s, heat treated – which we found, all the pre-cut wood at Home Depot was in such a condition. When you pick out your wood pieces, be sure to avoid anything with notches, or “pretty” grain imperfections. You want your pallet to be even and not bowed. It’ll be more difficult to work with and screw together.

OH! Don’t forget to let the awesome peeps at HD cut your wood for ya! Just one less thing you need to do.

We made a few friends while running around the home de’pot…and everyone was so nice! It was great to have so many wonderful conversations about food, eating healthy and the best way to cut down wood. You know, the normal DIY convos.

We got everything together and then went to work!

Remember what I said about the wrong screws?Well, such tiny machine bits are key to the whole building process! You’ll need to get coarse thread drywall screws, with good threads. Not too big, if you’re going to use the same size wood that we did – otherwise, you’ll split the wood and screw the pooch on this project. Trust me. we bought 1-1/4″ X 8GA screws. They worked like a charm!

 

 

 

 
And so the drilling began!

The beau enjoyed this part so much, that he didn’t even want to let me use the power drill. Plus…I may have gotten a wee-bit out of hand when he finally did let me use it and got so caught up in the crazy-powerness of it all and almost split the wood. It’s sooooo much fun building these DIY projects! Bwahahaha!

 

He made quick work of it and the entire pallet was put together lickety-split!

 

 

This fabric can be found in the garden section. They had a few kinds, but make sure not to purchase the meshy kind. You see in the picture above that there are no holes within the fabric. If you were planting the pallet in the ground, which you can, then you’d want the meshy type so the water may seep into the soil. Since we live in an apartment with no yard, the holey kind was a no-go.

 

 

 

 

Next we set the pallet flat on the ground, fabric down, and filled the pallet with 4 full size bags of moisture control soil. Honestly, we think another full bag may have been helpful to keep the seeds in place once we stood the pallet upright.
Be careful though!

You need to give the seeds (or saplings) time to grow roots. They have to latch onto the soil and then (in about 3 weeks if you planted seeds, 1.5 weeks for saplings) you can turn the pallet 90 degrees upright and stand it up. Make sure these little guys get plenty of sunlight and water.

One recommendation I’d make is for you to ADD Casters! They’d be helpful to move the pallet around because it is deceptively heavy. Seriously, oomph!

 

Happy building for the upcoming spring fruits and veggies! You should start planting in mid-February!

 

Much love,
CC